150 to 200 Engine Case Conversion

With Indian 200 engine casings costing  around £340 getting a 125/150 casing converted to a 200 is an alternative worth considering.

I sent one of my casings to Oiltek for converting and asked to have the casing Vapour Blasted and to check of the threads of all the studs.

The casing was as expected for being around 50 years old.

Turnaround is approximately 8 weeks, but you need to contact Oiltek beforehand as they get them done in batches.

When I sent mine I printed the instructions as well as address and contact details. This makes things easier. Oiltek did tell me they get some casings sent with no contact details or instructions. This is obviously going to delay matters.

My casing came back today Vapour Blasted and one timesert thread repair done and the 200 conversion done. My TS1 will be used with this and it’ll be going into the GP.

Visit Oiltek’s website for further information and contact details.

3 thoughts on “150 to 200 Engine Case Conversion

      1. Can’t go wrong with the service that Paul provides. I’m going to be leaving 3 casing too be done this weekend while taking in the Lcgb agm.

        Liked by 1 person

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s