SLUK XL5 Screen For LI Series 2 & 3 Lambretta

SLUK have released number of scootering related products and one particular item I’ve been after for my LI was a Coast 2 Coast screen. Unfortunately these haven’t been made and so it was a case of going without as nearly every screen for the LI series 3 wasn’t something I was prepared to put on my Lambretta.

Now they’ve just released a screen for the Series 2 & Series 3 LI Lambrettas and it’s called the XL5. SLUK say that it was inspired by the original café racer Biemme screen from the 1960’s, but with improved changes.

It comes in three parts, plus the fixings and a Hi Torque Fastener, (just like a Jubilee Clip, but Hi Torque)! All you need to do is bolt the screen to the main part or fairing with the metal band that adds strength as well as adding to the look.

Fitting is easy and the best part of it is with the Hi Torque fastener, fixing and removing the screen to carry out any under the headset maintenance means there’s nothing to it. All you use to attach to the headlight is a socket or a screwdriver.

SLUK do make a few points to note regarding fitting. They suggest putting insulation tape, Gaffer tape or 3M tape over the fixing area to help give a good fixing for the

fastener and also serves to help protect your paintwork. This makes sense, because the inside of the XL5 screen that will grip the headlight rim is smooth as is most headlight rims.

It is pointed out that the screen may make contact with legshield beading and may need trimming. My screen didn’t touch my legshield beading, but I have a disc brake with a reservoir on the handlebar and so the edge of the main part of the screen needed trimming by a few millimetres. SLUK say the main part of the screen is made from tough ABS plastic but it was easy enough to trim down with just a file.

I’d like to add that this isn’t bad workmanship from SLUK. As a Lambretta owner fettling and adapting things to fit is a common occurrence.  The standard Lambretta fit is hard thing to find and there’s nearly always an exception to standard with most Lambrettas out there.

Thirdly, the headset screws we sometimes use can have thick heads but SLUK supply thinner button head screws and make fitment of the screen better.

The last point of interest is with security of the fitting. SLUK say that the user can drill holes in the fastener so adding fixing points and making it harder to steal. 

It comes in a choice of white, black, silver and carbon effect.

I am happy with the screen. Quality is good and I’m confident with the fixings. I’ve a GammaTech Speedo that stands a bit proud of the headset and I’m adding a Sat Nav shortly, so it goes to helping with the profile of my Lambretta.

One final point. This doesn’t mean I’m going Mod and spending weekends at B & Q. I won’t be adding a target sticker on the screen.

SLUK Website

Direct Link to XL5 Screens

2 thoughts on “SLUK XL5 Screen For LI Series 2 & 3 Lambretta

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s