There’s many things about working on a Lambretta that make us question our sanity. Take fitting a bridge piece, a part of the Lambretta bodywork that’s removed and refitted, a lot. I used to think it would have been easier to dislocate my
fingers to fit it.
Things got easier some years ago when a Bridge Piece Fixing Kit came on the market. A great idea and welcomed by many, but it still meant drilling and riveting a bracket onto the frame.
SLUK have now produced a clip that saves all the bother of drilling and riveting. It’s so simple to use. No drilling, no prep work. Just push it on over the frame strut and that’s it. just sit the bridge piece in situ to make sure the clips are in the right place, move them if necessary and screw the bridge piece on.
The screws and clips are Stainless Steel and they’re very strong. Sticky did a test with a Torque Wrench to see which would give first. The screw or the clip. The screw thread gave way, leaving the clip thread in perfect condition to be used again without fear of getting a screw stuck.
You get 2 clips, 2 screws & two self adhesive rubber washers.
It fits all Series 1, 2 & 3 Models.
SLUK are taking pre-orders Here and will be posting these out on the 1st June.
2 thoughts on “The SLUK Clip”
I’ll have one set please
Hello Dave, you need to order from SLUK. https://www.scooterlab.uk/product/sluk-clip-lambretta-bridge-fitting-kit/