JB Fabrication Lambretta Engine Test Stand

This is the Lambretta Engine Test Bed made by Jon Betts at JB Fabrication.

DSC_6441-1sw

The frame is painted black and comes in three parts, which fit together with the four supplied nuts, bolts and washers. You also get a bottle for the fuel supply which has an on/off tap and hose included that sits in a holder on the frame.

The welding is very neat and the metal is more than strong enough to hold a Lambretta engine.

DSC_6451-1sw

If you have a spare headset that you’re not using, the raised bar that supports the fuel bottle is the right dimension to support one, but it’s not a requirement.

DSC_6436-1sw

It may not be an essential item of Lambretta equipment, but if you find yourself building an engine and no spare chassis to try it on, it will save a lot of bother and time having to swap engines. Even if you do have a frame waiting for the engine. It’s an easier way of testing an engine before fitting. An example being, If you find an issue that needs the top end stripping, it’s a hell of a lot easier to do with the engine out the Lambretta.

There’s really not much to it and it’s very easy to put together. Just attach the CDI, fill the bottle with fuel and fire up the engine.

Jon, makes various parts and tools for Lambrettas. He can be contacted on his Facebook page.

JB Fabrication Facebook Page

5 thoughts on “JB Fabrication Lambretta Engine Test Stand

  1. I have one of these, as well as several other bits of Jon’s workshop ideas – GR8 kit, all of it – well done fella, keep up the good work :))))

    Like

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s